您的位置:首页 > 新闻动态 > 地坪知识

环氧地坪中涂砂浆层和腻子层有什么区别?

发布日期:2019-06-21 浏览次数:11

在标准的环氧地坪施工工艺流程中一般都会施工中涂砂浆层和腻子层,砂浆层和腻子层构成了环氧地坪涂层的中涂层,不仅可以找平基面,还可以起到进一步稳固基面的作用,增加涂层厚度,从而提高漆膜的耐冲击、耐重压、耐磨能力,并且能有效的延长环氧地坪的使用寿命。既然砂浆层和腻子层都属于中涂层,那么它们有什么区别呢?

In the standard construction process of epoxy flooring, mortar and putty layers are usually coated. Mortar and putty layers form the middle coating of epoxy flooring coating. They can not only flatten the base surface, but also further stabilize the base surface and increase the thickness of the coating, thus improving the impact resistance, pressure resistance and wear resistance of the coating film, and effectively prolong the epoxy flooring. Service life. Since both mortar and putty layers belong to intermediate coatings, what is the difference between them?环氧地坪中涂砂浆层和腻子层的相同点:

Similarities between mortar and putty coatings on epoxy floors:

环氧地坪砂浆和腻子都是往光磊环氧中涂中加入一定比例的填料调配而成,采用批刀进行刮涂施工。

Epoxy floor mortar and putty are prepared by adding a certain proportion of filler into the epoxy coating of Guanglei, and scraping construction is carried out with batch knives. 环氧环氧地坪中涂砂浆层和腻子层的不同点:

The difference between mortar layer and putty layer in epoxy floor:

环氧腻子层是往环氧中涂中加入适量的比较细腻的石英粉,搅拌均匀即可用于腻子层的涂刮,可以有效的修复地面的细孔、裂纹、针眼以及一些凹凸不平的缺陷,对于表面要求高的环氧环氧地坪,要求表面光亮、平整,则需要刮涂腻子,以便修饰涂层,保证达到预定的光滑、平整的效果。

Epoxy putty layer is to add appropriate amount of fine quartz powder to the epoxy coating. It can be used to scrape the putty layer with even stirring. It can effectively repair the fine holes, cracks, pinholes and some uneven defects of the ground. For epoxy floor with high surface requirements, it is necessary to scrape the putty in order to modify the coating and ensure that the predetermined surface is bright and smooth. Smooth and smooth effect.环氧地坪砂浆层是往环氧中涂中加入80-120目的石英砂,做完后表面比较粗糙,因此在环氧砂浆层做完后需要再施工环氧腻子层进行找平。

Epoxy floor mortar layer is to add 80-120 mesh quartz sand to the epoxy coating. After finishing, the surface is rough. Therefore, epoxy putty layer needs to be leveled after finishing the epoxy floor mortar layer.批刮环氧中涂腻子层

Putty Layer in Batch Scraping Epoxy如果环氧地坪漆施工基面比较平整、无孔洞、且无需载重,则可省去砂浆层的涂装,直接施工环氧中涂腻子层,然后再涂装环氧地坪漆的面漆即可。

If the epoxy floor paint construction base surface is relatively flat, no holes, and no load, you can omit the mortar coating, directly apply the putty layer in the epoxy, and then paint the epoxy floor paint.


辛苦整理!转载请注明来自 http://pengs888.com/show.asp?id=109

你觉得这篇文章怎么样?

0 0
网友评论

管理员

该内容暂无评论

美国网友
在线咨询
微信咨询
联系电话
137-7148-9633
返回顶部