您的位置:首页 > 新闻动态 > 地坪知识

施工时怎么提高环氧地坪漆涂层的附着力?

发布日期:2019-06-24 浏览次数:6

环氧地坪的施工工艺相较于其他地坪产品,还是比较简单的,但是简单并不简约,每一道工序都要认真对待,仔细进行,这样才能真正保障环氧地坪的质量。环氧地坪因其具有美观无尘、耐磨抗压等性能受到多方追捧。在工厂车间地坪、物流仓储地面、地下停车场等常见到环氧地坪的身影,然而在施工过程中,对于提高环氧地坪漆涂层的附着力却非常头疼,涂层的附着力不佳,会缩短环氧地坪的使用寿命。因此,我们需要了解,如何才能提高环氧地坪漆涂层的附着力?

Compared with other flooring products, the construction technology of epoxy flooring is relatively simple, but simple and not simple. Every process should be taken seriously and carefully, so that the quality of epoxy flooring can be truly guaranteed. Epoxy flooring has attracted much attention because of its beautiful, dust-free, wear-resistant and compressive properties. Epoxy floors are common in workshop floors, logistics storage floors, underground parking lots, etc. However, in the construction process, it is very difficult to improve the adhesion of epoxy flooring paint coatings. The poor adhesion of coatings will shorten the service life of epoxy flooring. Therefore, we need to understand how to improve the adhesion of epoxy floor paint coating.

1、选择高质量、附着力好的环氧地坪漆

1. Selection of epoxy floor paint with high quality and good adhesion

进行环氧地坪施工时,要选择合格的、高质量的地坪产品。要求具有优异的附着力、良好的抗碱封固性能,以及能显著提高面涂的丰满度及光泽均匀,并且施工方便。

In the construction of epoxy flooring, qualified and high-quality flooring products should be selected. It is required to have excellent adhesion, good alkali-resistant sealing performance, and can significantly improve the fullness and gloss of the surface coating, and easy construction.

⒉涂装前必须清洁地坪表面,除去任何油污和盐

_Before painting, the floor surface must be cleaned to remove any oil and salt.

在进行地坪漆涂装前,先把地面的油污和它杂质去除干净。保持基层地面的洁净,没有油污堵塞基层地面的毛孔,地坪漆涂层的附着力会有所提高。

Before painting the floor paint, remove the grease and impurities from the floor first. Keep the grass-roots floor clean, without oil pollution blocking the pore of the grass-roots floor, the adhesion of the floor paint coating will be improved.

环氧地坪漆

Jotafloor Topcoat

3、被涂层的表面要进行打磨,增加粗糙度

3. The surface of the coating should be polished to increase its roughness.

进行涂装前,对于被涂层一定要进行必要的打磨处理。如打磨基层。增加表面粗糙度,一般涂装基层不要求太光滑,只要求基层表面质地均匀细腻就可以。过于光滑,会影响涂层的附着力。

Before painting, the coating must be polished. Such as grinding the grass-roots. To increase the surface roughness, the general coating base does not require too smooth, as long as the base surface texture is uniform and delicate. Excessive smoothness will affect the adhesion of the coating.

4、封闭底漆厚度要适宜

4. Sealing primer thickness should be appropriate

环氧地坪施工工序中,涂刷封闭底漆是必须的,一定要进行涂刷。但是涂刷的底漆厚度一定要适宜均匀,否则也会影响其他涂层的附着力。

In the construction process of epoxy flooring, it is necessary to brush the sealing primer, so it must be brushed. But the thickness of the primer must be uniform, otherwise it will affect the adhesion of other coatings. 

辛苦整理!转载请注明来自 http://pengs888.com/show.asp?id=135

你觉得这篇文章怎么样?

0 0
网友评论

管理员

该内容暂无评论

美国网友
在线咨询
微信咨询
联系电话
137-7148-9633
返回顶部