您的位置:首页 > 新闻动态 > 地坪知识

施工过程中如何增加环氧地坪漆的耐磨性呢?

发布日期:2019-06-25 浏览次数:10

环氧地坪漆的耐磨性是指漆膜干燥后,对摩擦作用的抵抗能力,即遇机械损伤时,坚持漆膜性能的一种能力。耐磨是环氧地坪漆的一个重要特点,那么如何增加环氧地坪漆的耐磨性呢?一般来说可以通过增加环氧地坪漆涂层厚度、表面涂罩光漆和打蜡来提高环氧地坪漆的耐磨性能。

The abrasion resistance of epoxy floor paint refers to the resistance to friction of the film after drying, that is, the ability to adhere to the film performance in case of mechanical damage. Wear resistance is an important characteristic of epoxy floor paint, so how to increase the wear resistance of epoxy floor paint? Generally speaking, the wear resistance of epoxy floor paint can be improved by increasing the coating thickness, surface varnish and wax.

1、增加厚度

1. Increasing Thickness

许多消费者为了节约成本,一般都会选择一遍底漆两遍面漆的环氧薄涂地坪,厚度通常只有0.3-0.5mm,这种环氧地坪的耐磨性能就比较差,可以通过刮涂中涂砂浆层和中涂腻子层来增加环氧地坪漆的厚度,这样不仅能增加环氧地坪漆的耐磨性能,还能增加环氧地坪漆的抗压性能。推荐阅读:《环氧地坪漆是否涂层越厚越好》

In order to save cost, many consumers usually choose the epoxy floor with one primer and two topcoats. The thickness of the epoxy floor is usually only 0.3-0.5mm. The wear resistance of the epoxy floor is poor. The thickness of the epoxy floor paint can be increased by scraping the mortar layer and middle putty layer. This can not only increase the wear resistance of the epoxy floor paint, but also increase the epoxy floor paint. Compressive properties. Recommended reading: Whether the Thicker the Epoxy Floor Paint is, the Better

2、表面涂罩光漆

2. Surface coating varnish

在环氧地坪漆完工后,通过在表面滚一遍聚氨酯清漆的方法,不仅可以形成平滑光亮的涂膜,提高环氧地坪的光泽度,使漆膜更加光亮美观,还可以提高环氧地坪漆的耐磨性。

After finishing the epoxy floor paint, by rolling the polyurethane varnish over the surface, not only the smooth and bright film can be formed, the gloss of the epoxy floor paint can be improved, the film can be more bright and beautiful, but also the wear resistance of the epoxy floor paint can be improved.

3、打蜡

3. Waxing

环氧地坪漆表面定期打蜡,可以对环氧地坪漆起到保护作用,因为蜡面比较硬,可以有效的阻止室外带进室内的细沙砾对地面的研磨、隔绝黑鞋印和轮胎印对地面的污染、防止硬物对地面的刻划。

Regular waxing on the surface of epoxy floor paint can protect the epoxy floor paint, because the surface of the wax is hard, which can effectively prevent the grinding of the ground by fine gravel brought into the room outdoors, prevent the pollution of the ground caused by the black shoes and tire prints, and prevent the sculpture of the ground by hard objects.

环氧地坪漆施工

Construction of Epoxy Floor Paint

环氧地坪漆耐磨性能测试方法:

Test methods for abrasion resistance of epoxy floor paint:

1、将环氧地坪漆涂在在专用圆形玻璃板上。

1. Apply epoxy floor paint on special round glass panels.

2、将试板固定在耐磨仪的工作盘上,加压臂上加上规定的载重,放下吸尘嘴,并调节至样板1-1.5mm。

2. Fix the test plate on the working plate of the wear-resisting tester, add the specified load on the pressure arm, put down the vacuum nozzle, and adjust it to the sample board 1-1.5mm.

3、开动开关,把样板先磨50r(圈),使之形成较平整的表面。

3. Turn on the switch and grind the sample for 50R (circle) to form a smooth surface.

4、用毛笔轻轻抹去浮屑,第一次称重。

4. Use a brush to gently wipe off debris and weigh it for the first time.

5、按产品标准规定调整计数器进行试验。当达到规定的耐磨转数时,即行停止。

5. Adjust the counter according to the product standard. When the specified wear-resisting speed is reached, it will stop.

6、取出样板,抹去浮屑,第二次称重。前后质量之差,即为漆膜失重。要求平行试验两次,每次所得值误差不大于7%,结果取平均值。比如:环氧砂浆地坪对耐磨性能的要求是:在臂重砝码750g,耐磨500r,前后漆膜质量之差不大于0.02g。

6. Take out the sample, wipe off the debris and weigh it for the second time. The quality difference between the front and back is the weight loss of the paint film. Two parallel experiments are required. The error of each test is not more than 7%, and the results are averaged. For example, the requirement of wear resistance of epoxy mortar floor is that the weight of arm is 750g, the wear resistance is 500r, and the difference of film quality between front and back is not more than 0.02g. 

辛苦整理!转载请注明来自 http://pengs888.com/show.asp?id=138

你觉得这篇文章怎么样?

0 0
网友评论

管理员

该内容暂无评论

美国网友
在线咨询
微信咨询
联系电话
137-7148-9633
返回顶部