环氧地坪涂层批刮施工案例

发布日期:2019-06-27 浏览次数:16

环氧地坪因其高强度、耐磨损等优异的性能,被人们广泛运用。环氧地坪的的涂层批刮是环氧地坪施工中的关键部分。首先,我们要知道环氧树脂地坪批刮施工的目的是什么?1、增厚,树脂涂层要达到用户要求的厚度;2、整型,通过涂层的批刮填补地坪的坑洼。作为环氧地坪施工中重要一环的涂层批刮环节,只有把握好它的每一步,才能确保环氧地坪的质量,使顾客满意。

Epoxy floor is widely used because of its high strength, wear resistance and other excellent properties. The batch scraping of epoxy floor coating is a key part in the construction of epoxy floor. First of all, we need to know the purpose of batch scraping construction of epoxy floor. 1. Thickening, resin coating to meet user requirements of thickness; 2. Shaping, through the batch scraping of the coating to fill the pits in the floor. As an important part of the construction of epoxy flooring, batch scraping of coating links can ensure the quality of epoxy flooring and satisfy customers only by grasping its every step.

第二、环氧树脂地坪的中涂批刮层需要进行多道批刮,并且每道批刮固化后往往需要进行打磨,这关系到下道工序的质量。

Secondly, the scraping layer of epoxy resin floor needs multi-pass scraping, and after each batch scraping and curing, it often needs grinding, which is related to the quality of the next process.

第三、涂层批刮层的打磨作业,传统上一般都使用角向磨光机。

Thirdly, the angular polisher is traditionally used in the polishing of batch scraping coatings.

磨光机的使用对环氧地坪的质量有很重要的作用,所以在使用磨光机的时候要注意避免下边这些问题:在施工过程中,操作的工人进行下蹲式工作,劳动强度大而工作效率低;因为角向磨光机在施工过程中很难与吸尘设备连接,所以在施工过程中灰尘较大,对工人的健康有很大的危害;

The use of polisher plays an important role in the quality of epoxy floor, so we should pay attention to avoid the following problems when using polisher: in the construction process, the workers who operate squat work, labor intensity is high and work efficiency is low; because the angular polisher is difficult to connect with vacuum equipment in the construction process, so the dust in the construction process is large, and it will affect workers. Health is very harmful.

由于角向磨光机使用的是串激式电机,负荷能力较差,在磨削时往往不能承受住与地面接触的压力,容易电流过大,造成电机的损坏人工操作角向磨光机对地面进行磨削时,磨片与地面大多是局部接触,这样容易造成磨片受力不均,损坏过快,砂盘磨片的消耗量大的情况。

Because the angular polisher uses series excitation motor, its load capacity is poor, it can not bear the pressure of contact with the ground when grinding, and the current is too large. When the angular polisher is used to grind the ground by manual operation, the grinding disc contacts with the ground mostly locally, which easily causes uneven force on the grinding disc, excessive damage and large consumption of the grinding disc. The situation.

针对这种情况,一些施工人员设法在地面磨削机上安装砂磨片,对中涂批刮进行打磨。这不仅解决了上述的问题,而且也提高了工作的效率。

In view of this situation, some constructors try to install abrasive discs on the ground grinder to polish the scraping of the middle coating batch. This not only solves the above problems, but also improves the efficiency of work.第四、用树脂砂浆搅拌机将树脂砂浆搅拌均匀,将搅拌好的树脂砂浆用摊铺机按顾客要求的厚度摊于素地表面,然后再用抹平机抹平。

Fourth, mix resin mortar evenly with resin mortar mixer, spread the mixing resin mortar paver on the surface of plain surface according to the thickness required by customers, and then smoothed with a smoother. 

辛苦整理!转载请注明来自 http://pengs888.com/show.asp?id=153

你觉得这篇文章怎么样?

0 0
网友评论

管理员

该内容暂无评论

美国网友
在线咨询
微信咨询
联系电话
137-7148-9633
返回顶部