您的位置:首页 > 新闻动态 > 地坪知识

环氧地坪有哪些用处如何保养使用

发布日期:2019-07-20 浏览次数:8

现如今,随着科技的发展,我们发明了各式的环氧地坪材料。而具有防腐、防尘、保养方便等优点的环氧地坪,就是其中的一种。在日常生活中,我们根据场地的使用要求,而采用具有相应特性的环氧地坪材料。下面我们就“环氧地坪的用处及其相关信息的介绍”来详细了解下。基材表面平整度。基材表面平整度指基材表面凹凸不平的程度。用2m靠尺,用塞尺测量靠尺下的缝隙,一般控制在3mm以下为宜。

Nowadays, with the development of science and technology, we have invented various kinds of epoxy floor materials. The epoxy floor with the advantages of anti-corrosion, dust-proof and easy maintenance is one of them. In our daily life, we use epoxy floor materials with corresponding characteristics according to the requirements of the site. Next we will "the use of epoxy flooring and related information" to understand in detail. Surface smoothness of base material. The smoothness of the substrate surface is the degree to which the surface of the substrate is uneven. It is advisable to measure the gap under the ruler with a 2m ruler and a plug ruler, generally under 3mm.

基面强度。基面强度不足会使环氧地坪涂层与基材拉开,或由于基层受力破坏,引起整个地面的破坏。一般要求基材压缩强度≥25MPa。可用小铁锤敲打基层,如果有空鼓,则必须采取灌浆等相应措施处理。

Base strength. Insufficient strength of the base surface will cause the epoxy floor coating and the base material to be pulled apart, or the whole ground will be damaged due to the stress damage of the base. The compressive strength of the base material is generally required to be greater than or equal to 25 MPa. Small hammers can be used to hit the grass-roots level. If there are empty drums, corresponding measures such as grouting must be taken to deal with them. 基层干燥程度。混凝土和砂浆地面中含有水分,会降低环氧地坪涂层与基层的粘结强度,另外也会引起涂层鼓泡或剥离现象。建议基层干燥时间一般要求28d以上。用含水率测试仪检测基面含水量,一般要求控制在6%以下。

Drying degree of base. The moisture content in concrete and mortar floor decreases the bond strength between epoxy floor coating and base layer, and also causes coating bubbling or peeling. It is suggested that the drying time of grass roots should be more than 28 days. It is generally required that the moisture content of the base surface be controlled below 6% by the moisture content tester.

在水泥基层表面,一般附有施工中的水泥尘屑,特别是新施工的混凝土表面,通常会有水泥浮浆(水泥游离体、松散、无强度)。钢板上会有锈渍,这些均会影响环氧地坪涂层与基层的附着力,施工前需要去除。

On the surface of cement base, there are usually cement dust in construction, especially on the surface of newly constructed concrete. There are usually cement floating slurry (cement free body, loose, non-strength). There will be rust stains on the steel plate, which will affect the adhesion between the epoxy floor coating and the base layer, and need to be removed before construction.

【环氧地坪有哪些作用和特点】

[What are the functions and characteristics of epoxy floor?]

环氧地坪是一种高强度、耐磨损、美观的地板,具有无接缝,质地坚实,耐药品性佳,防腐,防水,防尘,保养方便,维护费用低廉等优点。环氧地坪开始是用于功能性地坪:如防腐,耐磨,防滑,发展到通用的普通工业地坪;除了具有功能性的要求,还具有装饰性的效果。

Epoxy floor is a kind of high-strength, wear-resistant and beautiful floor. It has the advantages of seamless, solid texture, good resistance to drug, anti-corrosion, waterproof, dust-proof, convenient maintenance and low maintenance cost. Epoxy flooring was originally used for functional flooring: such as anti-corrosion, wear-resistant, anti-skid, developed to general industrial flooring; besides functional requirements, it also has decorative effect.


环氧地坪大致分为4种:

Epoxy floors can be roughly divided into four types:

1、环氧平涂地坪(普通车间防尘、对环境要求不高的场所)。

1. Epoxy flat-coated floor (common workshop dust-proof, low environmental requirements of the place).

2、环氧自流平地坪(无尘车间、对厂房净化要求比较高工业生产区域)。

2. Epoxy self-leveling floor (dust-free workshop, industrial production area with high purification requirements for workshop).

3、环氧防静电地坪(对抗静电有要求的电子行业制造车间)。

3. Epoxy anti-static floor (electronics manufacturing workshop with anti-static requirements).

4、环氧砂浆耐磨地坪(工厂有重负荷运行的车间、仓库、通道、地下停车场等区域)。

4. Epoxy mortar wear-resistant floor (factory has heavy-duty workshops, warehouses, corridors, underground parking areas).

辛苦整理!转载请注明来自 http://pengs888.com/show.asp?id=261

你觉得这篇文章怎么样?

0 0
网友评论

管理员

该内容暂无评论

美国网友
在线咨询
微信咨询
联系电话
137-7148-9633
返回顶部