环氧地坪底漆用量与使用注意事项有哪些

发布日期:2019-09-12 浏览次数:39

环氧地坪漆底漆层的涂布是环氧地坪漆施工过程中根底的一步。底漆层处于无锡环氧地坪基面与环氧地坪涂层之间,这样能够增强环氧地坪涂层与地上的附着力。公司依据多年施工经历来谈谈有关环氧地坪漆底漆用量与运用注意事项,环氧地坪底漆的运用量受外部影响表现在如下几个方面:影响环氧地坪底漆运用量的方法,首要要素是环氧地坪施工基面的粘结强度进而影响整体的强度。施工环氧地坪漆一般要求混凝土地上的强度大于C25,较好的地上中底漆用量一般在0.05~0.2kg/m2,若地上强度过低,地上疏松,易起砂,则环氧地坪底漆的运用量则会依据实践环境跟情况而改动用量。

The coating of epoxy floor paint primer is a fundamental step in the construction of epoxy floor paint. The primer layer is between the base of the floor and the epoxy floor coating, which can enhance the adhesion between the epoxy floor coating and the ground. Based on years of construction experience, the company talks about the amount of epoxy floor primer and the matters needing attention in its application. The use of epoxy floor primer is affected by external factors in the following aspects: the method of influencing the use of epoxy floor primer, the primary factor is the bond strength of the construction base of the floor and then the overall strength. Construction of epoxy floor paint generally requires that the strength of concrete on the ground is greater than C25, and the better amount of primer on the ground is generally 0.05-0.2 kg/m2. If the strength on the ground is too low, the ground is loose and easy to sand, the use of epoxy floor primer will be changed according to the practical environment and the situation. 此外,假定地坪施工基面强度低,但又没有涂布恰当适量的环氧地坪底漆来添加地坪基面粘结强度,则环氧地坪质量较差。假定地坪上有叉车等重物时,环氧地坪就可能会连同环氧地坪基面一同被压陷拉裂。

In addition, the quality of the epoxy flooring is poor if the strength of the flooring construction base is low, but the proper amount of epoxy flooring primer is not coated to add the cohesive strength of the flooring base. Assuming there are forklift trucks and other weights on the floor, the epoxy floor may be collapsed and cracked together with the epoxy floor base.

环氧树脂地坪漆逐渐成为工业地上装修首要趋势

Epoxy resin floor paint has gradually become the main trend of industrial ground decoration

因而,在环氧地坪施工时,必定要确保底漆的涂布量适量。假定地上整体强度过低,则可依据承重及强度要求选用环氧砂浆涂层,或许有条件的可从头进行地上改造,概略可咨询浙江恒杉实业有限公司,这样能够减少不必要得本钱损耗。

Therefore, in the construction of epoxy floor, it is necessary to ensure the proper amount of primer coating. Assuming that the overall strength of the ground is too low, epoxy mortar coating can be selected according to the load-bearing and strength requirements. Perhaps the ground can be reconstructed from scratch, and Zhejiang Hengshan Industrial Co., Ltd. can be consulted roughly to reduce unnecessary cost losses.

新旧地上,当然磨损程度不一样,旧地上依据运用时间长短及各种承载运用程度的不同,其地上的损坏程度也跟着不一样,有时候地上会呈现大面积的坑坑洼洼和裂缝等问题,因而在施工环氧底涂之前必定要对进行地上的修补,对裂缝及坑洞修正及地上平整度的操控都恰当的有必要。当关于一个比较新的地上,其地上强度及凭证度较好时,一般的用量操控在0.05~0.2kg/m2规划,关于旧地上就得依据实践情况有专业得施工人员进行良好得操控,如需了解更多可咨询浙江恒杉实业有限公司,信任会给您一个满意的答案。

Of course, the degree of wear and tear is different between the old and the new ground. The degree of damage on the old ground is also different according to the length of use and the degree of various load-bearing applications. Sometimes, there are large areas of pits, holes and cracks on the ground. Therefore, before the construction of epoxy primer, the above ground must be repaired. It is necessary to correct the cracks and pits and to control the roughness of the ground properly. When the strength and credentials of a relatively new site are good, the general dosage control is 0.05~0.2kg/m2. For the old site, the professional construction personnel must operate it well according to the practice. If you need to know more, you can consult Zhejiang Hengshan Industrial Co., Ltd. and trust will give you a satisfactory result. Answer.


辛苦整理!转载请注明来自 http://pengs888.com/show.asp?id=361
在线咨询
微信咨询
联系电话
133-2811-8578
返回顶部