您的位置:首页 > 新闻动态 > 环氧地坪

地面潮湿对环氧地坪施工有没有不好的影响

发布日期:2019-06-17 浏览次数:13

环氧地坪是一种高强度、耐磨损、美观的地板,具有无接缝、质地坚实、耐药品性佳、防腐、防尘、保养方便、维护费用低廉等优点。环氧地坪可根据不同的用途要求设计多种方案: 如薄层涂装,1-5mm厚的自流平地面,防滑耐磨涂装,砂浆型涂装,防静电,防腐蚀涂装等。环氧地坪大致可以分为:环氧树脂磨石环氧地坪、环氧树脂彩砂压砂环氧地坪环氧树脂自流平地坪、环氧树脂砂浆型地坪、环氧树脂平涂型地坪。

Epoxy floor is a kind of high strength, wear-resistant and beautiful floor. It has many advantages, such as seamless, solid texture, good resistance to drug, anti-corrosion, dust-proof, easy maintenance and low maintenance cost. The epoxy floor can be designed according to different requirements of different uses: thin coating, 1-5mm thick self-leveling floor, anti-skid and wear-resistant coating, mortar coating, anti-static, anti-corrosion coating, etc. Epoxy floor can be roughly divided into: epoxy resin grinding floor, epoxy resin coloured sand compacted floor, epoxy resin self-leveling floor, epoxy resin mortar floor, epoxy resin flat coating floor. 

适用范围

Scope of application

环氧地坪从开始时用于功能性地坪:如防腐、耐磨、防滑,发展到通用的普通工业地坪;除了具有功能性的要求,还具有装饰性的效果。在工业地坪获得广泛应用的基础上,随着人们生活水平的不断提高,现已在家庭装潢中得以推广应用。地坪漆已成为我国发展速度最快的产业之一,引起众人的注意。它可象水泥制品那样实现工厂化生产,前景更可观! 适用于各种场地,如:厂房,机房,仓库,实验室,病房,手术室,车间等。

From the beginning, epoxy flooring was used for functional flooring: such as anti-corrosion, wear-resistant, skid-resistant, developed to general industrial flooring; besides functional requirements, it also has decorative effect. On the basis of extensive application of industrial floor, with the continuous improvement of people's living standards, it has been widely used in family decoration. Floor paint has become one of the fastest growing industries in China, which attracts people's attention. It can realize factory production like cement products, and has a better prospect. Suitable for all kinds of venues, such as: workshop, machine room, warehouse, laboratory, ward, operating room, workshop, etc.

地面潮湿是不能够做环氧地坪的,做上去的话会起水泡,经过一段时候的话会大面积脱落.

It is impossible to make epoxy flooring when the ground is wet. If it is done, it will blister and fall off in a large area after a period of time.

按标准要求表面水分含量≤8%才可以施工。

According to the standard, the surface moisture content is less than 8% before construction.

一般潮湿地面要求施工的话,只有用火枪等相关的工具进行长时间的烘烤之后再做,但是还是有一定的风险会起水泡。最好是等基础面自然风干才做环氧地坪

Generally speaking, if construction is required on wet ground, it should be done only after long baking with relevant tools such as muskets, but there is still a certain risk of blistering. It is better to wait for the natural air drying of the base surface to make the epoxy floor.

辛苦整理!转载请注明来自 http://pengs888.com/show.asp?id=88

你觉得这篇文章怎么样?

0 0
网友评论

管理员

该内容暂无评论

美国网友
在线咨询
微信咨询
联系电话
137-7148-9633
返回顶部